Products

Product Description

This new Rock Crusher from K&M Krushers. These crushers are the next generation of crushers. All of the critical parts are cut out with a CNC Laser cutter to insure everything is square and precise. The bolts & nuts that hold the hammers and mount your motors are schedule No. 8 alloy. The Hammers are a Rockwell Hardness of 62 on the outside and No.58 on the inside turning your 2-1/4" rocks into 100-200 mesh talcum powder. Easy 3 wing knobs for front plate removal. The screen in the bottom of the drum is now fitted with a new easy replacement system. The screen is stainless with more holes per inch than any other crusher allowing more thru-put. The Gas Motor is a backed with a 3 Year Commercial Warranty. This motor features a 4 stage air-filter and 3 fuel filters. Its a 4 stroke motor and designed for hard work. This crusher will come in 2 shipments,1 is the Motor & the other is the crusher & all the parts to mount the motor.

• The Gas Motor is a Kohler 7 Hp Motor that is backed with a 3 Year Commercial Warranty
• This motor features a 4 stage air-filter and 3 fuel filters
• Its a 4 stroke motor and designed for hard work

• Interference free PTO face
• Dual oil fills and drains
• No tools required all season air cleaner
• Easy access throttle choke and shutoff
• Oil Sentry automatic low oil engine shutdown system
• Carburetor bowl drain

• Overhead valve design
• Increased displacements
• High-inertia flywheel

• Large metal fuel tank and chrome plated cap
• Swirl induction combustion chamber

• Oversized muffler with heat shield
• Mechanical governor
• Sound-deadening alloy crankcase
• Silenced air intake

• Electronic ignition system
• Automatic compression release
• Dual ball bearings
• Indexable easy pull recoil starter

• Quad-Clean heavy-duty cyclonic air cleaner
• Warm air intake system for cold weather operation
• Cast iron cylinder bore
• Steel-forged crankshaft
• Stellite-faced exhaust valve
• Water trap to separate moisture in fuel
• 3 fuel filters: fill neck in tank and carburetor inlet
• 3 year commercial warranty

• Color: Gold
• Size: 11"
• Drum Size: 2'' - 1/2"
• Hose Power: 7 HP
• Dimension: 18" H x 20" W x 26" L
• Weight: 95 lbs