Products

Product Description

The Studio Technologies Model 211 Announcer's Console is designed to serve as the audio control center for announcers, commentators, and production talent. The tabletop unit is suited for numerous applications including on-air television sports broadcasting. The Model 211 integrates all on-air, talkback, and cue audio signal routing into one compact system. Ease of use, configuration flexibility, and sonic excellence are some of the unit's highlights.

The Model 211 is compatible with many broadcast and audio system environments. Standard connectors are used to interface microphone, headphone, talkback, and talent cue signals. Whether it's microphone switching, talkback output, or headphone cue feed, superior audio quality is maintained. A microprocessor provides the Model 211's logic power, allowing exacting control of the unit's operation. A range of configuration bests allow the desired operating parameters to be easily selected. While flexible, the user is presented with an easy-to-use set of controls and indicators.

A truly next-generation product, extensive research into the needs and desires of field production personnel was integral to the Model 211's creation. Target applications include on-air television, radio, streaming, and production applications. Specialized features are included to allow the Model 211 to be used in a variety of other audio applications. These include stadium announcement and voice-over/narration booths.

• Announcers 211 Model Console
• Microphone preamp with selectable gain and P48 phantom power
• Two line-level inputs
• Two pushbutton switches suggestion programmable "click-free" audio path control
• Transformer-balanced main output
• Transformer-coupled line-level talkback output
• Stereo headphone monitoring
• Auxiliary relay contacts
• Powered by external DC source
• Extensive configuration bests accessible via DIP switches located on bottom of enclosure
• Frequency Response: 10 Hz-20 kHz, ±;0.2 dB, mic in/main out
• Distortion : 0.008%, measured at 1 kHz, mic in/main out
• S/N Ratio: 86 dB, referenced to -42 dBu mic in/-2 dBu main out
• Mic In, Line In 1 & 2: 3-pin female XLR
• Main Out, Talkback Out: 3-pin male XLR
• Headphone Out: 1/4-inch 3-conductor phone jack
• 24 Vdc Power In: coaxial power jack, 2.1 x 5.5 mm, locking bushing, compatible with Switchcraft S760K plug
• Type: electronically balanced
• Input Impedance: 2 k ohms, nominal
• CMRR: >80 dB, 20 Hz-20 kHz, 40 dB gain
• Compatibility: dynamic or phantom-powered mics
• Type: balanced, transformer-coupled
• Impedance: 10 k ohms
• Implementation: optional IFB Input Card Kit can be installed into back panel
• Type: 2-channel, unbalanced, transformer-coupled
• Impedance: 10 k ohms, nominal
• Threshold: 2 dB above nominal level
• Attack/Release Time: 2 mSec/100 mSec, nominal
• Slope: 5:1, nominal
• Nominal Level: -2 dBu
• Maximum Level: +20 dBu into 2 k ohms
• Impedance: 100 ohms, nominal
• Type: transformer-coupled with series capacitors and isolation resistors
• Impedance: 600 ohms, nominal
• Nominal Level: +4 dBu
• Compatibility: intended for connection to mono or stereo headphones or headsets with nominal impedance of 100 ohms or greater
• Type: volt