Products

Product Description

The HDMI over IP H.264 PoE Extender Kit allows HDMI source and display equipment to be connected in point-to-point, point-to-multipoint and multipoint-to-multipoint configurations via a local Ethernet network, in a flexible, expandable and effective manner, without the need to install dedicated cabling systems. Connectivity may be up to 330ft 100m @ 1080p via Cat5e/6 UTP cable, and the device supports PoE PD if used with a PoE PSE Ethernet Switch.

This device supports PoE PD, and is intended to be powered via a PoE PSE Ethernet Switch.

• Supports hdmi up to 1080p resolution @ 30hz
• Supports 100’s of transmitters & receivers depending on network bandwidth
• H.264 compression supports high image quality
• High compression rate suitable for wifi transmission
• Extend hdmi up to 330ft 100m over cat5e/6
• Supports point-to-point, point-to-multipoint and multipoint-to-multipoint applications
• Supports rs232 and ir transmission for remote control
• Poe powered

• One 1 HDMI receptacle for audio video
• One 1 RJ45S for Cat 5e6 unshielded or shielded twisted pair
• One 1 DB9 for Serial Port for RS232
• One 1 3.5mm jack for IR emitter sensor
• Six 6 DIP Switches for device ID addressing

• Environment: HDMI up to 1080p 30Hz
• Devices: DVD, plasma, projectors, monitors, TV, PC, laptops, servers supporting HDMI
• Control: Controllable via the Ethernet port
• HDMI standard: HDMI ver 1.3, HDCP 1.1
• Maximum Distance On HDMI per side: 6.6ft 2m; On Cat5e6: 330ft 100m
• Latency One: 1 Video Frame
• Compression Video: H.264 fully compliant with ISO IEC 14496-10 high profile and level 4.1, up to 1920x1080p 30Hz
• Audio: MPEG
• Network Requirement: Compliant with the full IEEE 802.3-2002 specifications 100BaseTX
• Network Bandwidth Video: 18Mbps, Audio 256Kbps
• IR Frequency: 38KHz to 56KHz
• RJ45 Pin Configuration: Use EIA TIA 568A or 586B straight through wiring
• RJ45 Link: Pin 1 R Pin 2 T; Pin 3 R Pin 6 T; Pin 4 R Pin 5 T; Pin 7 R Pin 8 T
• Power Source: This device supports PoE PD, an external power supply is not included It is intended to be powered via a PoE PSE Ethernet Switch If required, an al power supply 500993 may be purchased separately
• PoE Standard: IEEE 802.3af
• Power Consumption: Transmitter 4.5W Receiver 2.5W
• Temperature Operating: 0° to 40°C
• Storage: -20° to 85°C
• Humidity: Up to 95 Percent non-condensing
• Enclosure Type: Metal enclosure
• Compliance Regulatory: FCC, CE, RoHS
• Flammability: 94V0
• Warranty: 2 Years
• Dimensions: 4.4 x 4.6 x 1.0 111mm x 120mm x 25mm
• Weight: 1 lbs