Products

Product Description

The Ward-Beck D6201B is a dual 1 x 4 AES distribution amplifier designed for use in 75 Ohm, unbalanced installations. It can provide four copies of each incoming signal when used with a T6301A rear assembly. It may also be used as a 1 x 8 AES distribution amplifier with SRC to provide up to eight outputs that are sample rate converted. For high density applications when used with the T6401A up to twenty 1 x 4 AES DA's with SRC can be provided in a single two rack unit frame. The D6201B supports audio sampling frequencies from 30kHz to 192 kHz. Cable equalization and reclocking techniques enable the D6201B to recover the incoming digital audio signal reliably. D6201B is housed in the openGear OG3-FR-C series frames and can be configured and monitored through DashBoard.

• Cable equalization and data reclocking on the incoming AES/EBU signal
• Supports audio sampling frequencies from 30kHz to 192kHz
• EQ insert switch automatically activates the cable equalization
• Designed for use in 75 Ohm, unbalanced, coaxial cable installations
• Status Tallies - Lock, No Lock and EQ on front edge of the card
• works with dashboard remote control and monitoring software

• Input Voltage: 0.2 to7 Vp-p.
• Output Level: 1 Vp-p nominal
• Resolution: 24 Bit
• Jitter: Less than 5 ns.
• Power Requirements: +12 V @ 330mA.
• Dimension: 3.025 in. high x 12.800 in. deep.
• Weight: 2 lbs