Products

Product Description

The StudioTech's Model 362 Listen-Only Beltpack is a self-contained 2-channel user device that supports headphone monitoring of two audio channels associated with the Dante audio-over-Ethernet media networking technology. Each Model 362 is intended to be used by one user, providing them with the form factor, reliability, and features needed to be effective in a variety of applications. It's expected that most applications will use multiple Model 362 units to support the individual audio monitoring needs of a group of users.

• Configurable audio channel routing
• Dual level controls
• Excellent audio quality
• 1/4-inch and 3.5 mm output jacks
• Power-over-Ethernet (PoE) powered

• Type: Dante audio-over-Ethernet
• Bit Depth: up to 24
• Sample Rate: 44.1, 48, 88.2 and 96 kHz
• Number of Receiver (Input) Channels: 2
• Dante Audio Flows: 2 receiver
• Power Source: Power-over-Ethernet (PoE)
• Type: twisted-pair Ethernet, Power-over-Ethernet (PoE) supported
• Data Rate: 100 Mb/s (10 Mb/s and 1000 Mb/s "GigE" Ethernet not supported)
• Type: Dual-channel
• Compatibility: intended for connection to mono or stereo headsets or earpieces with nominal impedance of 50 ohms or greater
• Maximum Output Voltage: 3.8 Vrms, 1 kHz, 150 ohm load
• Frequency Response: 20 Hz to 20 kHz, -2 dB
• Distortion (THD+N): <0.002%
• Dynamic Range: >100 dB
• Headphone Output: 1/4-inch and 3.5 mm 3-conductor jacks
• Ethernet: Neutrik etherCON RJ45