Products

Product Description

PESA's PRO-HDMI2HD is a throw-down style converter module allowing HDMI in 480p, 720p, or 1080p to SD-SDI, HD-SDI, or 3G-SDI video signals to be viewed or recorded to a professional broadcast device supporting SMPTE 259, 292, or 424. The supplied power brick accepts a primary power input of 100-240V, 50/60Hz, and supplies a +5V DC output. Power consumption is less than 3 watts. Each PRO-HDMI2HD module sends output signals through a standard 75 Ohm BNC connection. Destination devices can be located up to 300m (1000ft) for SD-SDI, up to 150m (500ft) for HD-SDI, and 90m (300ft) for 3G-SDI. The compact pack comes with two mounting tabs for easy attachment to wall or under-the-table locations.

• Input support for HDMI Deep Color
• Support for HDCP
• Output support for 3G-SDI formats(SMPTE 425M, Level A): 1080p @50/59.94/60Hz (4:2:2)
• Bit Rates for 2.97 Gbps, 2.967Gbps, 1.485 Gbps, 1.4835 Gbps, 270 Mbps
• Auto 3G/HD/SD-SDI detection
• Easy installation with wall mounting design
• Supports up to 8 channels of audio, 7.1 or 5.1 optional
• Low jitter
• Re-clocked outputs for looping SD/HD/3G SDI signals

• Number of Outputs: 1
• Connector Type: HDMI, Type A (19 pin female)
• Cable Connection Distance: 15m
• Number of Outputs: 2
• Connector Type: BNC, 75 Ohm
• Video Bandwidth: 2.97 Gbps , 2.970/1.001 Gbps
• Auto Detect: Yes
• Video Support: [3G] 1080p50/59.94/60 - 4:2:2
• Audio Support: Yes, embedded
• Housing Dimension: 79mm x 84mm x 27mm; 3.1 x 3.3 x 1.2 inches
• Operational Temperature: 0-40 degree C
• Operational Humidity: 20-90% RH (non-condensation)
• Power Connection: +5VDC ( inter-locking power plug)
• Power Consumption: 3W (max)
• AC Power Brick: 100-240VAC, 50/60Hz
• Weight: 1.15 lbs