Products

Product Description

Tripp Lite's MRV2012UL Inverter/Charger is a heavy-duty, DC-to-AC inverter with automatic line-to-battery transfer and integrated charging system that serves as an extended-run UPS, a standalone power source or an automotive inverter suitable for rugged RV applications. It provides equipment with utility- or generator-supplied AC electricity filtered through premium ISOBAR surge protection. It's the ideal, quiet alternative to gas generators. The MRV2012UL Inverter/Charger supplies up to 2000 watts of continuous 120V AC power from any 12V DC battery or automotive DC source. It passes sine wave utility or generator power during battery charging and UPS line power operation, plus an efficient PWM sine wave AC output in inverter and UPS backup modes.

When the hardwire AC input is energized, commercial power passes through to connected equipment and the battery bank is recharged via 3-stage charging system with user-selectable 25/100 amp charger output. In the UPS mode, it responds to blackouts and voltage fluctuations with a near-instantaneous automatic transfer to battery-derived AC output. To provide the extra power needed to cold-start heavy-duty power tools and motorized equipment, the MRV2012UL Inverter/Charger has an OverPower inverter output feature that temporarily provides up to 150% of the continuous output for up to 60 minutes and a DoubleBoost inverter output feature that delivers up to 200% of the continuous output for up to 10 seconds. With a reliable, large transformer design and frequency control, it can power resistive electronic loads or large inductive motors, compressors and other items with high current needs on startup.

• MRV2012UL serves as an automotive or stationary DC-to-AC inverter with automatic line-to-battery transfer and integrated battery charger
• Supplies a 120V AC output from a 120V AC line power source or 12V DC battery source
• 2000 watts continuous AC output in inverter mode, 3600 watts continuous AC output in AC line power mode Automatic Transfer
• Protected hardwire DC terminal posts safely accept heavy-gauge input wiring from attached battery bank
• Protected hardwire output passes 120V line power or inverter output through to connected equipment
• Extremely reliable large-transformer design tested to UL (USA & Canada) standards Overload / Overtemperature Protection
• DoubleBoost inverter output supports momentary startup loads up to 200% of the continuous rating for up to 10 seconds
• OverPower inverter output supports longer duration overloads to 150% for up to 60 minutes under ideal battery and temperature conditions
• Resettable 25A charger AC input breaker and variable-speed cooling fan protect the inverter from load- and temperature-related failures
• Grounding lug properly connects the inverter/charger system to earth ground or vehicle grounding system
• Automatic overload and thermal shutoff safely turns off inverter as excessive loads or overheating conditions develop Operating Modes / Display LEDs
• 3-position operating mode switch supports "AUTO" mode
• Six front panel LEDs display AC/DC operational modes, overload status, DC voltage level, shutdown status and system fault status

• Nominal Output Voltage(s) Supported: 120V
• Frequency Compatibility: 60 Hz
• Output Receptacles: Hardwire
• Output (Watts): 2000
• Peak Output Capacity (Watts): 4000
• Output Frequency Regulation: 60 Hz (+/- 0.3 Hz)
• Overload Protection: Inc