Please login to view pricing details.
The JonyJib2 09 is a 2 section jib giving 9 feet of camera height and 3-6 feet of reach. It 2 mast sections, camera platform, leveling cable, pivot bracket, 100mm mounting hub and rear control and weight mounting center. It also with an articulating mounting bracket with 1/4" screw for your LCD monitor. This jib has 3 selectable fulcrum points. 30 lb. camera capacity The JonyJib2 is expandable from 9' (2 sections) to 18' (5 sections) in 3' increments. Each extension tube is 4' long giving a 1' overlap between sections. Since each section slides out, pulled from the previous sections, you may store unused sections in the tail as ballast weight. This lightens your counterweight demand. You can buy as few, or as many, sections as you need. Then purchase more sections when you need them. The main arm and extension sections are fabricated aluminum extrusions while the pivot point, camera platform and rear control center are steel. All are powder coated with a durable cobalt black finish.The JonyJib2 may also be fitted with many optional accessories from motorized pan & tilt units, zoom/focus controls, LCD monitors, cable looms and power accessories. Order the optional JonyJib Wiring Loom and all jib & camera cables are contained in a braided jacket making setup and teardown much quicker than using individual wires. The pivot point is pre-drilled to mount an optional Anton Bauer Gold Mount plate kit that, with your batteries, can feed an optional passive 12 volt power distribution box at the tail. The optional distribution box can feed 12 volts power to the motorized pan & tilt head, zoom & focus controls, the monitor and the camera. The pivot point is also pre-drilled to mount LCD monitor mounting bracket or an 'optional' monitor platform for 5-9" CRT monitors. The adjustable camera platform self-leveling cable is also anchored at the pivot point. The camera platform is designed to over-sling or under-sling an optional motorized pan & tilt head without any changes.
Specifications