Products

Product Description

The dataprobe iPIO-2 is a 2-port network I/O controller with PoE. iPIO is simple to install and easy to use, but enables you to develop highly flexible telemetry systems.

• Dataprobe 2 Port Network I & O Controller with PoE
• Web Controlled Relays: One click relay control from clear web browser interface. Set name, qualifying time and color scheme for each relay.
• Real Time Status Monitoring: Continuous updates of input status. No need for browser refresh. Set name and color scheme for each relay
• GPIO Transportation Over the Network: Send contact closure information across the network to one or multiple places. Get the information you need where you need it.
• Contact Closure via IP: Manage with SNMP or create your own cuts tom programming to operate relays over the network.
• Link Supervision with Alarm: Continuously monitors data link between each device and alerts you when the network fails.
• Email Notification: Receive updates on all input and /or output activity.
• SNMP Management: SNMP V2c compliant MIB. Integrate into you network management scheme.
• SSL and AES Encryption: Secure protocols for data integrity and privacy. Prevent unapproved access.
• Wet or Dry Input Monitoring: Configurable for +VDC inputs 3-30 volts.
• Multi-Site Distribution: Get status information from one point to multiple locations simultaneously. Ideal for load sheading and security alert notifications.
• Alarm Consolidation: Summarize multiple alarm points to one location.
• Height 1.74" Width 5.63" Depth 3.3"
• Humidity 9 Pct Non Condensing
• Humidity 9 Pct Non Condensing
• Power Supply, included
• Input: 15 - 24 VAC 5/6Hz
• Output: +5VDC. 4 Watts.
• Current Maximums .5A @ 12VAC or 1A @ 24VDC
• Switching Power 6VA Max 5uW Min
• Switching Voltage 12VAC or 6VDC Max 1VDC Min
• Switching Current 1A Max 1mA Min
• Resistance 1 milliohms (initial value)
• One LED Indicator for Each Input, Configurable for On or Off state
• One LED Indicator for each Relay Output. Configurable for ON or Off state
• Network Link (Link) and Activity (Act).
• Remote Unit Link Status (Rmt).
• Digital Inputs
• Dry relay/Switch closures or
• +/-3VDC to +/-3 VDC