Products

Product Description

Designed for enterprise data center the EV100 hot-swap solid state drive (SSD) delivers reliable data throughput optimized for read-intensive workloads.

Striking a balance between the high demands for data storage capacity and the expectation for 24/7 access, the Axiom EV100 hot-swap drives enable IT infrastructure to hyperscale capacity while meeting the challenge of the higher performance storage tiers.

For use in mission-critical environments where low latency performance and large amounts of data storage capacity are required.

• Standard Endurance Technology (SET)
• Consistent I/O latency and high I/O throughput performance
• Enhanced power-loss protection and power failure protection
• Temperature sensor and monitoring
• Low power consumption
• Enhanced end-to-end data protection
• Innovative flash endurance and data integrity protection platform

• Low total cost of ownership (TCO)
• Proven quality and reliability
• Optimized for data center applications
• Enhanced enterprise endurance with .3 Drive Writes Per Day (DWPD)
• Sustained Read/Write IOPS up to 68K/20K

• Capacity: 240GB
• Components: 16nm NAND MLC
• Encryption: AES 256-bit
• Interface: SATA
• Transfer Rate Synchronous (Maximum): 6Gbps
• Form Factor: 3.5-inch

Bandwidth Performance

• Sustained Sequential Read: Up to 500 MB/s
• Sustained Sequential Write: Up to 260 MB/s

Read and Write IOPS (Full LBA Range, IOMeter Queue Depth 32)

• Random 4KB Reads: Up to 68,000 IOPS
• Random 4KB Writes: Up to 10,200 IOPS
• Operating Temperature: 0° C to 70° C
• Maximum altitude: 10,000 ft
• Average Power Consumption: Active: Up to 5.6 W (TYP)
• Idle: 600 mW
• Power Management: 5.0 V ± 5%
• Reliability (MTBF): 2,000,000 Hours
• Shock: 1,000 G/0.5 ms
• Weight: 0.61 lbs