Products

Product Description

The ST121UTPEP VGA Video Extender over Cat5 - Point to Point lets you connect a remote VGA display/projector up to 80m (250ft.) away from the VGA signal source. The ST121UTPEP is a bundled kit that includes both a local and a remote unit providing a complete end to end solution for a single source/display connection, transmitting the source VGA signal over a standard Ethernet cable (Cat5e or better UTP cable, terminated with RJ45 connectors).

Offering convenient and cost-effective VGA distribution, the ST121UTPEP only requires one power adapter which can be installed at either the local or remote end of the connection, depending on what is most convenient for your application.

To ensure a tidy installation, the ST121UTPEP includes a mounting bracket for the receiver to help eliminate unnecessary cable tangles.

• Extends video signal by up to 250 ft. (80m)
• Supports 1920x1200 or 1600x1200 resolutions at 150 ft.
• Supports 1280x1024 or 1024x768 resolutions at 250 ft. (80m)
• Mounting bracket included
• Single power adapter can be connected at local or remote end of the extension
• Uses standard Cat 5 or better cabling
• Kit consists of 1 Base unit and 1 Remote unit
• Pure hardware design - no soft.ware or drivers required
• VGA Extender Over Cat5-Point to Point UTPE Series

• 1 - VGA over Cat5 Transmitter

• Audio: No
• Cabling: Cat 5 UTP
• Daisy-Chain: No
• Ports: 1
• Maximum Distance: 80 m / 260 ft.
• Local Unit Connectors: 1 - RJ-45 Female
• Remote Unit Connectors: 1 - RJ-45 Female
• Center Tip Polarity: Positive
• Output Current: 0.6A
• Output Voltage: 12 DC
• Power Consumption (In Watts): 7.2
• Power Source: AC Adapter Included
• Color: Black
• Enclosure Type: Aluminum
• Height: 1 in. (25 mm)
• Length: 3.9 in. (100 mm)
• Width: 5.4 in. (138 mm)
• Weight: 1.65 lbs